Massey Ferguson MF Centora, M3/M5

Brake fluid capacity & service interval

Massey Ferguson MF Centora, M3/M5 models require brake fluid with a capacity of 0,5 liter. Service intervals include checks every 100 hours and fluid changes every 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Centora MF 7280/7280AL, M5 (2012-2014)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 24 months
Centora MF 7282/7282AL, M5 (2012-2014)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 24 months
Centora MF 7280/7280AL, M3 (2009-2011)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 24 months
Centora MF 7282/7282AL, M3 (2009-2011)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 24 months

Additional Notes

  • The Massey Ferguson MF Centora hydraulic brake system holds a capacity of 0.5 liter across all listed configurations, which is a relatively small reservoir volume consistent with a dedicated brake circuit rather than a shared hydraulic system.
  • A 100-hour check interval applies to all four configurations under normal use conditions, reflecting the hour-based service scheduling common in agricultural machinery where engine hours are a more meaningful measure of wear than calendar time.
  • The fluid change interval is set at 24 months for every listed configuration, meaning calendar time governs replacement regardless of accumulated operating hours.
  • The MF 7280/7280AL in the M3 trim (2009-2011) and the M5 trim (2012-2014) share identical brake fluid specifications, with no variation in capacity, check interval, or change interval between the two trim designations.
  • The same pattern holds for the MF 7282/7282AL, where the M3 (2009-2011) and M5 (2012-2014) configurations also carry identical 0.5-liter capacity and the same 100-hour check and 24-month change intervals.
  • No difference in brake fluid capacity or service intervals exists between the 7280/7280AL and 7282/7282AL model variants, indicating a uniform hydraulic brake system specification across both model designations within the Centora range for 2009-2014.

Other Systems