Massey Ferguson MF 5S

AdBlue (DEF) capacity & service interval

The Massey Ferguson MF 5S uses AdBlue (DEF) fluid with a capacity of 20 liters. The data covers 10 configurations of this model.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 5S.105 Dyna-4 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.105 Dyna-6 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.115 Dyna-4 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.115 Dyna-6 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.125 Dyna-4 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.125 Dyna-6 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.135 Dyna-4 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.135 Dyna-6 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.145 Dyna-4 (2021- )
  • Use: Normal
  • Capacity 20 liter
MF 5S.145 Dyna-6 (2021- )
  • Use: Normal
  • Capacity 20 liter

Additional Notes

  • The Massey Ferguson MF 5S AdBlue tank holds 20 liters across all ten configurations in the lineup, spanning the 105, 115, 125, 135, and 145 power variants in both Dyna-4 and Dyna-6 transmission forms introduced from 2021.
  • A 20-liter AdBlue capacity is a mid-range figure for agricultural tractors in this power class, large enough to reduce refill frequency during extended field operations without adding excessive weight to the front of the machine.
  • All ten configurations carry the selective catalytic reduction (SCR) designation, meaning AdBlue is injected into the exhaust stream upstream of a catalyst, where it converts nitrogen oxides into nitrogen and water vapor to meet emissions standards.
  • The uniform 20-liter capacity across both the Dyna-4 and Dyna-6 transmission variants indicates the AdBlue tank design is shared regardless of the number of transmission ratios, with the Dyna-4 offering four powershift steps and the Dyna-6 offering six.
  • The capacity figure of 20 liters represents a service fill value, reflecting the usable volume of the tank during normal operation rather than a dry-fill or overhaul measurement that would account for system lines and pump priming volumes.
  • All specifications are listed under normal use conditions, which in agricultural equipment typically refers to standard duty cycles rather than extended high-load or dusty environments that might accelerate fluid consumption rates.
  • The five power variants in the MF 5S range, from the 105 to the 145, share an identical AdBlue tank capacity, suggesting a common chassis architecture governs tank placement and volume rather than engine output level.

Other Systems