Massey Ferguson 8100

Coolant capacity & service interval

Massey Ferguson 8100 coolant capacity ranges from 28,5 to 34 liters. Service intervals include checking every 100 hours and changing every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 8110 (1995-1999)
  • Use: Normal
  • Capacity 28,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 8120 (1995-1999)
  • Use: Normal
  • Capacity 28,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 8130 (1995-1999)
  • Use: Normal
  • Capacity 28,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 8140 (1995-1999)
  • Use: Normal
  • Capacity 28,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 8150 (1995-1999)
  • Use: Normal
  • Capacity 28,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 8160 (1995-1999)
  • Use: Normal
  • Capacity 34 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Massey Ferguson 8100 series cooling system capacities fall into two distinct values across the 1995-1999 model range. The MF 8110 through MF 8150 all share a 28.5-liter cooling system capacity, while the MF 8160 requires 34 liters, a difference of 5.5 liters reflecting the larger engine displacement in the top-of-range model.
  • A 28.5-liter cooling system capacity is a substantial volume, consistent with large-displacement agricultural diesel engines where extended thermal management across long working hours is a primary design consideration.
  • The MF 8160's 34-liter cooling capacity is the largest in the series and corresponds to the highest-powered variant in the 8100 lineup, where greater heat rejection demands a proportionally larger coolant volume.
  • All six models in the 1995-1999 range share an identical check interval of every 100 operating hours. At typical agricultural workloads, this interval recurs several times per season, allowing early detection of coolant level loss or contamination before a full drain is due.
  • The coolant change interval across all MF 8100 series models is set at 1,000 hours or 12 months, whichever comes first. The time-based threshold of 12 months accounts for machines that accumulate hours slowly, ensuring coolant additives are refreshed on a calendar basis regardless of usage intensity.
  • All specifications across the MF 8110-8160 are listed under normal use conditions. The 100-hour check and 1,000-hour or annual change intervals apply specifically within that normal-use classification.
  • The consistency of the 1,000-hour or 12-month change interval across all six variants, despite the capacity difference between the MF 8160 and the rest of the range, indicates the interval is driven by fluid degradation timelines rather than system volume.

Other Systems