Massey Ferguson 7700S

Automatic transmission fluid capacity & service interval

Massey Ferguson 7700S automatic transmission fluid capacity is 64 liters. Service intervals include checking at 10 hours and changing at 1800 hours. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 7715 S Dyna-6 (2018- )
  • Use: Normal
  • Capacity 64 liter
  • Check 10 hours
  • Change 1800 hours
  • Code: Dyna-6
MF 7715 S Dyna-VT (2018- )
  • Use: Normal
  • Capacity 64 liter
  • Check 10 hours
  • Change 1800 hours
  • Code: Dyna-6
MF 7716 S Dyna-6 (2018- )
  • Use: Normal
  • Capacity 64 liter
  • Check 10 hours
  • Change 1800 hours
  • Code: Dyna-6
MF 7716 S Dyna-VT (2018- )
  • Use: Normal
  • Capacity 64 liter
  • Check 10 hours
  • Change 1800 hours
  • Code: Dyna-6
MF 7718 S Dyna-6 (2018- )
  • Use: Normal
  • Capacity 64 liter
  • Check 10 hours
  • Change 1800 hours
  • Code: Dyna-6
MF 7718 S Dyna-VT (2018- )
  • Use: Normal
  • Capacity 64 liter
  • Check 10 hours
  • Change 1800 hours
  • Code: Dyna-6
MF 7719 S Dyna-VT (2018- )
  • Use: Normal
  • Capacity 64 liter
  • Check 10 hours
  • Change 1800 hours
  • Code: Dyna-6

Additional Notes

  • All seven configurations across the Massey Ferguson 7700S series share an identical transaxle fluid capacity of 64 liters. In agricultural equipment, a transaxle combines the transmission and axle differential into a single integrated housing, which accounts for the relatively large fluid volume compared to passenger vehicle transmissions.
  • The 64-liter figure represents a service fill capacity for the transaxle unit. Volumes of this magnitude in tractor transaxles reflect the shared fluid reservoir that lubricates and cools both the transmission and hydraulic systems housed within the same casing.
  • Both transmission types available in the 7700S series, the Dyna-6 and the Dyna-VT, carry the same 64-liter capacity and identical service intervals. The Dyna-6 is a six-step powershift transmission, while the Dyna-VT is a continuously variable transmission, yet the shared transaxle architecture results in uniform fluid specifications across both.
  • The fluid level check interval is specified at 10 hours of operation under normal use conditions. A 10-hour check interval is notably short and reflects the high-load, high-heat environment typical of agricultural machinery, where fluid condition and level can change rapidly during intensive field work.
  • The fluid change interval is set at 1,800 hours under normal use conditions. For a working tractor, 1,800 operating hours can represent several seasons of field use, making the change interval a significant maintenance milestone rather than a routine annual service.
  • The MF 7719 S is listed exclusively with the Dyna-VT transmission, while the MF 7715 S, 7716 S, and 7718 S each appear in both Dyna-6 and Dyna-VT variants. Despite this difference in transmission availability across model numbers, the transaxle fluid specifications remain uniform at 64 liters, a 10-hour check, and an 1,800-hour change interval.
  • All specifications apply under normal use conditions. In agricultural equipment contexts, normal use typically refers to standard field operations as opposed to sustained extreme-load or high-temperature conditions, which may carry separate service requirements.

Other Systems