Massey Ferguson 3700

Automatic transmission fluid capacity & service interval

Massey Ferguson 3700 automatic transmission fluid capacity ranges from 36 to 39 liters. Service intervals include checking every 10 hours and changing every 1200 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MF 3707 AL (2018- )
  • Hydraulic system
  • Use: Normal
  • Capacity 38 liter (PowerShuttle)
  • Check 10 hours
  • Change 1200 hours
  • MF 3707 V/S/F/GE/WF (2018- )
  • Hydraulic system
  • Use: Normal
  • Capacity 36-39 liter
  • Check 10 hours
  • Change 1200 hours
  • MF 3708 AL (2018- )
  • Hydraulic system
  • Use: Normal
  • Capacity 38 liter (PowerShuttle)
  • Check 10 hours
  • Change 1200 hours
  • MF 3708 V/S/F/GE/WF (2018- )
  • Hydraulic system
  • Use: Normal
  • Capacity 36-39 liter
  • Check 10 hours
  • Change 1200 hours
  • MF 3709 AL (2018- )
  • Hydraulic system
  • Use: Normal
  • Capacity 38 liter (PowerShuttle)
  • Check 10 hours
  • Change 1200 hours
  • MF 3709 V/S/F/GE/WF (2018- )
  • Hydraulic system
  • Use: Normal
  • Capacity 36-39 liter
  • Check 10 hours
  • Change 1200 hours

Additional Notes

  • The transmission/hydraulic system on the Massey Ferguson 3700 series uses a shared-sump design, meaning a single fluid reservoir serves both the transmission and hydraulic functions simultaneously.
  • AL variants of the 3707, 3708, and 3709 each carry a fixed capacity of 38 liters, tied specifically to the PowerShuttle transmission configuration.
  • A PowerShuttle transmission uses a hydraulically actuated clutch pack to change direction without stopping, which accounts for the defined single-figure capacity rather than a range.
  • The V/S/F/GE/WF transmission variants across the 3707, 3708, and 3709 share a capacity range of 36-39 liters, reflecting variation between the different transmission types grouped under those suffix designations.
  • All six configurations share an identical fluid check interval of 10 operating hours, a short interval consistent with early monitoring after fluid changes or initial operation.
  • The fluid change interval of 1200 hours applies uniformly across all AL and V/S/F/GE/WF variants under normal use conditions, a figure typical for agricultural equipment operating in controlled or standard field environments.
  • The 1200-hour change interval is measured in engine operating hours rather than calendar time, which is standard practice for agricultural machinery where annual usage varies considerably between operators.

Other Systems