Massey Ferguson 3300

Coolant capacity & service interval

Massey Ferguson 3300 coolant capacity ranges from 10,2 to 17,5 liters. Service intervals include checking every 10 hours and changing every 1200 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 3315 V/S/F/GE (2000-2003)
  • Use: Normal
  • Capacity 10,2 liter
  • Check 10 hours
  • Change 1200 hours
MF 3325 V/S/F/GE (2000-2003)
  • Use: Normal
  • Capacity 10,2 liter
  • Check 10 hours
  • Change 1200 hours
MF 3330 V/S/F/GE (2000-2003)
  • Use: Normal
  • Capacity 17,5 liter
  • Check 10 hours
  • Change 1200 hours
MF 3340 V/S/F/GE (2000-2003)
  • Use: Normal
  • Capacity 17,5 liter
  • Check 10 hours
  • Change 1200 hours
MF 3350 S/F/GE (2000-2003)
  • Use: Normal
  • Capacity 17,5 liter
  • Check 10 hours
  • Change 1200 hours
MF 3355 S/F/G (2000-2003)
  • Use: Normal
  • Capacity 17,5 liter
  • Check 10 hours
  • Change 1200 hours

Additional Notes

  • The Massey Ferguson 3300 series cooling system capacities fall into two distinct groups across the 2000-2003 model range. The MF 3315 and MF 3325 share a 10.2-liter capacity, while the MF 3330, MF 3340, MF 3350, and MF 3355 all share a 17.5-liter capacity. The larger figure reflects the greater coolant volume required by the bigger engine configurations in the upper models.
  • A 17.5-liter cooling system capacity is notably substantial for agricultural tractors of this era, indicating a larger engine block with more extensive water jacket volume and a correspondingly larger radiator circuit to manage heat rejection under sustained field loads.
  • The 10.2-liter capacity of the MF 3315 and MF 3325 represents a meaningfully smaller cooling circuit, consistent with lower-displacement engines that generate less heat output and therefore require less coolant volume to maintain operating temperatures.
  • All six models in the 2000-2003 range share an identical coolant check interval of every 10 operating hours. At that frequency, the check interval is among the more frequent routine service tasks, reflecting the importance of monitoring coolant level and condition in high-load agricultural equipment.
  • The coolant change interval is set at 1200 operating hours across all six models, regardless of cooling system capacity. In agricultural machinery, a 1200-hour interval is a long-cycle service event, typically coinciding with major scheduled maintenance periods rather than seasonal service.
  • The suffix designations V, S, F, GE, and G appearing in the model type descriptions denote different cab or bodywork configurations within each model number. All configurations within a given model share the same cooling system capacity and service intervals, indicating the engine and cooling circuit remain consistent across those variants.
  • The MF 3350 is listed only in S, F, and GE configurations, while the MF 3355 is listed in S, F, and G configurations. Neither includes a V designation, distinguishing them from the MF 3315 through MF 3340 models which all carry the V variant alongside the others.
  • All specifications across the six models are classified under normal use conditions. In service interval terminology, normal use typically refers to operation within standard duty cycles and environmental conditions, as opposed to severe use classifications that would shorten recommended intervals.

Other Systems