Massey Ferguson 2000

Power steering fluid capacity & service interval

Massey Ferguson 2000 power steering fluid capacity ranges from 85 to 88 liters. Service intervals include checking at 100 or 125 hours and changing at 1000 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MF 2645 (1985-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 85 liter
  • Check 100 hours
  • Change 1000 hours
  • Code: 8/6
  • MF 2685 (1985-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 88 liter
  • Check 100 hours
  • Change 1000 hours
  • Code: 8/6
  • MF 2725 (1985-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 88 liter
  • Check 100 hours
  • Change 1000 hours
  • Code: 16/12
  • MF 2620 (1980-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 88 liter
  • Check 125 hours
  • Change 1000 hours
  • Code: 8/6
  • MF 2625 (1980-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 88 liter
  • Check 125 hours
  • Change 1000 hours
  • Code: 8/6
  • MF 2640 (1980-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 88 liter
  • Check 125 hours
  • Change 1000 hours
  • Code: 8/6
  • MF 2680 (1980-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 88 liter
  • Check 125 hours
  • Change 1000 hours
  • Code: 8/6
  • MF 2720 (1980-1987)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 88 liter
  • Check 125 hours
  • Change 1000 hours
  • Code: 16/12

Additional Notes

  • Across the Massey Ferguson 2000 series, the power steering fluid specification covers a shared reservoir serving the transaxle, hydraulic system, and power steering simultaneously. A single fluid volume therefore supports three interconnected functions, which accounts for the notably large capacities listed.
  • The MF 2620, MF 2625, MF 2640, MF 2680, and MF 2720 all carry an 88-liter capacity for the combined transaxle, hydraulic, and power steering system. A reservoir of that size is characteristic of large agricultural tractors where the hydraulic circuit must sustain implement lift, steering assist, and transmission lubrication from one shared sump.
  • The MF 2645 holds 85 liters for the same combined system, which is 3 liters less than the 88-liter figure shared by the other models in the series covering the 1980-1987 period.
  • The MF 2685 shares the 88-liter capacity with the majority of the series, placing it in line with the MF 2620, MF 2625, MF 2640, MF 2680, and MF 2720 despite entering production later in 1985.
  • Models introduced from the start of the 1980-1987 range, specifically the MF 2620, MF 2625, MF 2640, MF 2680, and MF 2720, carry a fluid level check interval of 125 hours under normal use conditions.
  • The MF 2645, MF 2685, and MF 2725, all of which entered production in 1985, share a shorter check interval of 100 hours under normal use conditions, compared to the 125-hour interval assigned to the earlier models.
  • All eight models in the series share a uniform fluid change interval of 1000 hours under normal use conditions, regardless of differences in capacity or check interval frequency.
  • In hour-based service schedules common to agricultural equipment, intervals are tied to engine operating hours rather than calendar time or distance, reflecting the variable and often continuous-duty nature of tractor field work.

Other Systems