Manitou Maniscopic, MT/MTA

Brake fluid capacity & service interval

Manitou Maniscopic, MT/MTA models utilize brake fluid with a capacity range of 0,08 to 0,8 liters. Service intervals require a check every 300 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
BTI 220 (1998- )
  • Use: Normal
  • Capacity 0,08 liter
  • Check 300 hours
BTI 225 (1998- )
  • Use: Normal
  • Capacity 0,08 liter
  • Check 300 hours
MVT 665 T (1998- )
  • Use: Normal
  • Capacity 0,08 liter
MVT 675 T (1998- )
  • Use: Normal
  • Capacity 0,8 liter

Additional Notes

  • The Manitou Maniscopic MT/MTA BTI 220 and BTI 225 share an identical hydraulic brake system capacity of 0.08 liter, placing both well within the range typical of compact brake fluid reservoirs found on smaller telescopic handler configurations.
  • The MVT 665 T also carries a hydraulic brake system capacity of 0.08 liter, aligning with the smaller-reservoir figure seen across the BTI series variants starting from 1998.
  • The MVT 675 T stands apart with a hydraulic brake system capacity of 0.8 liter, a value ten times greater than the 0.08 liter figure recorded for the BTI 220, BTI 225, and MVT 665 T, reflecting a substantially larger brake fluid reservoir on that particular model.
  • For the BTI 220 and BTI 225, a 300-hour check interval is specified under normal use conditions for the hydraulic brake system, representing a time-based maintenance cycle measured in machine operating hours rather than calendar time.
  • No check interval figure appears in the specifications for the MVT 665 T or MVT 675 T hydraulic brake systems, whereas the BTI 220 and BTI 225 each carry the 300-hour check interval under normal use.

Other Systems