Landini Series 6 ROBO-SHIFT
Coolant capacity & service interval
Landini Series 6 ROBO-SHIFT uses coolant with a capacity of 27 liters. The service interval is 1000 hours or 12 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 6-145 Robo-shift (2016-2021) |
|
| 6-160 Robo-shift (2016-2021) |
|
| 6-175 Robo-shift (2016-2021) |
|
Additional Notes
- The Landini Series 6 ROBO-SHIFT carries a cooling system capacity of 27 liters across the 6-145, 6-160, and 6-175 variants, indicating a substantial shared cooling circuit consistent with the demands of high-output agricultural powertrains.
- The 27-liter figure applies uniformly across all three power variants from 2016-2021, meaning no variation in cooling system volume exists between the lower and upper ends of the lineup.
- The coolant change interval is set at 1000 hours or 12 months, whichever comes first, under normal use conditions across the 6-145, 6-160, and 6-175 for the full 2016-2021 period.
- A 1000-hour service threshold on a tractor of this class reflects the kind of extended operational cycles typical in commercial farming, where annual calendar-based intervals serve as a secondary trigger for operators who accumulate hours more slowly.
- The dual-trigger interval structure, combining an hourly threshold with a fixed calendar period, means a machine used infrequently enough to stay under 1000 hours in a year would still require a coolant change at the 12-month mark.