Landini Powerfarm II

Brake fluid capacity & service interval

Landini Powerfarm II uses brake fluid with a capacity of 1 liter. Service intervals require changes every 6 months or 500 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Powerfarm II 100, Perkins 1104D-44TA (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 6 months/ 500 hours
Powerfarm II 110, Perkins 1104D-44TA (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 6 months/ 500 hours
Powerfarm II 120, Perkins 1104D-44TA (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 6 months/ 500 hours

Additional Notes

  • The Landini Powerfarm II hydraulic brake system holds a capacity of 1 liter across the 100, 110, and 120 variants, all equipped with the Perkins 1104D-44TA engine.
  • A 1-liter brake fluid capacity is a relatively modest volume, consistent with the reservoir and line fill requirements of a compact tractor hydraulic brake circuit rather than a large-scale overhaul fill.
  • The brake fluid change interval is specified at 6 months or 500 hours, whichever comes first, under normal use conditions.
  • The dual-trigger interval of 6 months and 500 hours reflects that brake fluid degradation is driven by both time-based moisture absorption and operational hours, so either threshold alone is sufficient to prompt a change.
  • The 100, 110, and 120 power variants share identical brake fluid capacity and service interval figures, indicating no differentiation in brake system sizing across the Powerfarm II lineup despite differences in engine output.

Other Systems