Landini Multifarm

Differential fluid capacity & service interval

Landini Multifarm differential fluid capacity is 7,5 liters. Service intervals occur every 1000 hours or 12 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Multifarm 75, Perkins 1104C-44 (T2) (2016- )
  • Front
  • Use: Normal
  • Capacity 7,5 liter
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Multifarm 80, Perkins 1104D-44 (T3) (2016- )
  • Front
  • Use: Normal
  • Capacity 7,5 liter
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Multifarm 90, Perkins 1104D-44T (T3) (2016- )
  • Front
  • Use: Normal
  • Capacity 7,5 liter
  • Change 1000 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • The front differential capacity across the Landini Multifarm 75, 80, and 90 is 7.5 liters, a figure that reflects a service fill volume rather than a full overhaul drain, as front differentials in tractors of this class typically retain residual fluid during routine changes.
  • All three Multifarm variants share an identical front differential service interval of 1,000 hours or 12 months, whichever comes first, under normal use conditions.
  • The dual-trigger interval structure, combining an operating hour threshold with a calendar limit, means a tractor accumulating low annual hours would still require a fluid change at the 12-month mark under normal use.
  • Despite the difference in engine designations across the three models, specifically the Perkins 1104C-44 in the Multifarm 75 versus the Perkins 1104D-44 and 1104D-44T in the 80 and 90, the front differential capacity and change interval remain uniform at 7.5 liters and 1,000 hours/12 months.
  • The Multifarm 90 carries a turbocharged variant of the Perkins 1104D engine, denoted by the T suffix in 1104D-44T, yet the front differential specifications are not differentiated from the naturally aspirated configurations in the 75 and 80.
  • The Tier 2 classification of the Multifarm 75 engine and the Tier 3 classification of the 80 and 90 engines represent different emissions standards, yet the front differential service specifications are not separated by emissions tier in the available data.

Other Systems