Landini Mistral

Automatic transmission fluid capacity & service interval

Landini Mistral automatic transmission fluid capacity ranges from 24 to 40 liters. Service intervals include checks at 100 hours and changes at 500 hours or 1000 hours and 12 months. The data covers 16 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Mistral 40/40 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Normal
  • Capacity 40 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: HST
  • Mistral 40/40 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Initial service
  • Capacity 40 liter
  • Change 500 hours
  • Code: HST
  • Mistral 40/40 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Normal
  • Capacity 24 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: STD
  • Mistral 40/40 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Initial service
  • Capacity 24 liter
  • Change 500 hours
  • Code: STD
  • Mistral 45/45 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Normal
  • Capacity 40 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: HST
  • Mistral 45/45 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Initial service
  • Capacity 40 liter
  • Change 500 hours
  • Code: HST
  • Mistral 45/45 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Normal
  • Capacity 24 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: STD
  • Mistral 45/45 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Initial service
  • Capacity 24 liter
  • Change 500 hours
  • Code: STD
  • Mistral 50/50 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Normal
  • Capacity 40 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: HST
  • Mistral 50/50 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Initial service
  • Capacity 40 liter
  • Change 500 hours
  • Code: HST
  • Mistral 50/50 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Normal
  • Capacity 24 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: STD
  • Mistral 50/50 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Initial service
  • Capacity 24 liter
  • Change 500 hours
  • Code: STD
  • Mistral 55/55 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Normal
  • Capacity 40 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: HST
  • Mistral 55/55 HST Euro 2 (2004-2008)
  • Hydrostatic
  • Use: Initial service
  • Capacity 40 liter
  • Change 500 hours
  • Code: HST
  • Mistral 55/55 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Normal
  • Capacity 24 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: STD
  • Mistral 55/55 HST Euro 2 (2004-2008)
  • Hydraulic system
  • Use: Initial service
  • Capacity 24 liter
  • Change 500 hours
  • Code: STD

Additional Notes

  • The Landini Mistral HST Euro 2 range covers four variants — the 40, 45, 50, and 55 — all produced from 2004-2008, and all sharing identical fluid capacity and service interval specifications across both the hydrostatic transmission and the transmission/hydraulic system.
  • The hydrostatic transmission holds 40 liters across all four variants, a notably large fill volume that reflects the demands of a continuously variable hydraulic drive circuit rather than a conventional geared transmission.
  • The transmission/hydraulic system carries a separate 24-liter capacity on all variants, indicating a distinct fluid circuit that serves both the mechanical transmission components and the hydraulic functions simultaneously.
  • Under normal use conditions, both the hydrostatic transmission and the transmission/hydraulic system share the same check interval of every 100 hours, meaning fluid level monitoring applies equally to both circuits on the same schedule.
  • The normal-use change interval for both fluid circuits is set at 1000 hours or 12 months, whichever comes first, combining an hour-based threshold with a fixed calendar limit regardless of machine activity.
  • An initial service change interval of 500 hours applies to both the hydrostatic transmission and the transmission/hydraulic system across all variants, representing a break-in drain that occurs at half the standard normal-use change interval.
  • No fluid level check interval is listed for the initial service rows on either circuit, meaning the 100-hour check specification is exclusive to the normal use condition rather than the initial service period.
  • The 40-liter hydrostatic transmission capacity remains constant across the 40, 45, 50, and 55 variants, indicating no capacity differentiation between the lower and higher power configurations within the HST Euro 2 lineup.

Other Systems