Lamborghini Spire

Automatic transmission fluid capacity & service interval

Lamborghini Spire automatic transmission fluid capacity is 41 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Spire 105, Stage 5->ZKDRF20200TL50001 (2022- )
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Spire 105, Stage 5->ZKDRG40200TL50001 (2022- )
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Spire 75, Stage 5->ZKDRE40200TL50001 (2022- )
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Spire 75, Stage 5->ZKDRF60200TL50001 (2022- )
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Spire 95, Stage 5->ZKDRE80200TL50001 (2022- )
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Spire 95, Stage 5->ZKDRG00200TL50001 (2022- )
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Lamborghini Spire transmission/transaxle fluid capacity is 41 liters across all six configurations listed, covering the Spire 75, Spire 95, and Spire 105 variants. A 41-liter figure is consistent with a large agricultural or industrial transaxle assembly rather than a passenger vehicle gearbox, where fluid capacities typically range from 1 to 4 liters.
  • All six configurations share an identical service interval structure: a fluid level check at 300 hours and a full fluid change at 1,200 hours or 12 months, whichever comes first. The dual-trigger change interval combining operating hours with a calendar limit is standard practice for equipment that may accumulate hours unevenly across seasons.
  • The 300-hour check interval represents roughly one-quarter of the 1,200-hour change interval, placing a fluid condition inspection at a regular midpoint well before a full drain is required. Hour-based intervals are common in agricultural machinery, where annual mileage is not a meaningful measure of wear.
  • All specifications apply under normal use conditions. In equipment service classifications, normal use typically refers to operation within the manufacturer's standard load, temperature, and duty-cycle parameters, as opposed to severe or extended-duty conditions that would warrant shorter intervals.
  • The Spire 75, Spire 95, and Spire 105 designations indicate three distinct power or output ratings within the Spire line, yet all three share the same 41-liter capacity and the same 300-hour check and 1,200-hour change schedule. No variation in fluid capacity or service interval exists across the power variants in the listed specifications.
  • Each configuration is identified by a unique serial number threshold following "Stage 5," such as ZKDRF20200TL50001 for one Spire 105 variant and ZKDRG40200TL50001 for another. Serial number thresholds in equipment specifications typically mark a production revision point from which a particular specification set applies.
  • Two separate serial number ranges are listed for both the Spire 105 and the Spire 95, while the Spire 75 also carries two distinct serial number entries. Each pairing shares identical fluid capacity and service interval values, indicating that the serial number distinction reflects a production or configuration variant rather than a difference in fluid service requirements.

Other Systems