Lamborghini Spire F Target
Coolant capacity & service interval
Lamborghini Spire F Target uses coolant with a capacity range of 12 to 13 liters. Service intervals include checking at 10 hours and changing at 2400 hours or 24 months. The data covers 9 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Spire F 80 Target, Stage 5->ZKDLP10200TL50001 (2020- ) |
|
| Spire F 80 Target, Stage 5->ZKDLP50200TL50001 (2020- ) |
|
| Spire F 105 Target , Stage 3B->ZKDEC30200TL10001 (2018-2020) |
|
| Spire F 80.4 Target , Stage 3B->ZKDEB50200TL10001 (2018-2020) |
|
| Spire F 80.4 Target , Stage 3B->NNZKK702W0BL00001 (2018-2020) |
|
| Spire F 90.4 Target , Stage 3B->ZKDEB90200TL10001 (2018-2020) |
|
| Spire F 100 Target Compact, Stage 3B->ZKDEB10200TL10001 (2016-2020) |
|
| Spire F 80 Target Compact, Stage 3B->ZKDEA70200TL10001 (2016-2020) |
|
| Spire F 90 Target Compact, Stage 3B->ZKDEF90200TL10001 (2016-2020) |
|
Additional Notes
- The Lamborghini Spire F Target cooling system capacity splits into two values across the lineup. The Spire F 80 Target Compact, Spire F 90 Target Compact, and Spire F 100 Target Compact all carry a 12-liter capacity, while the Spire F 80.4 Target, Spire F 90.4 Target, and Spire F 105 Target hold 13 liters.
- The 13-liter capacity appears exclusively in configurations introduced from 2018 onward, covering the Stage 3B variants of the 80.4, 90.4, and 105 models. The earlier 2016 Stage 3B configurations are all rated at 12 liters.
- The two Spire F 80 Target Stage 5 configurations, identified by serial prefixes ZKDLP10200TL50001 and ZKDLP50200TL50001, share the 12-liter cooling system capacity with the Stage 3B Compact variants rather than the larger 13-liter figure seen in other non-Compact Stage 3B models from the same period.
- A coolant level check interval of 10 operating hours applies uniformly across all nine configurations listed. In agricultural and industrial machinery, a 10-hour check interval typically aligns with daily inspection routines during active seasonal use.
- The coolant change interval is set at 2400 hours or 24 months, whichever comes first, for all configurations under normal use conditions. The dual-trigger format means calendar time can mandate a change even when the hourly threshold has not been reached, which is relevant for lower-utilization machines.
- The 2400-hour service threshold is notably long by agricultural machinery standards, reflecting the extended-life coolant formulations typically specified for modern diesel engines operating under normal conditions.
- The Spire F 80.4 Target Stage 3B is represented by two distinct serial number ranges, NNZKK702W0BL00001 and ZKDEB50200TL10001, both covering 2018-2020 and both specifying the same 13-liter capacity with identical check and change intervals.