Lamborghini R

Coolant capacity & service interval

Lamborghini R uses coolant with a capacity range of 16 to 23 liters. Service intervals include checking every 10 hours, changing every 12 months, and changing every 2400 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
R 1306, ->7001 (2009-2013)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
R 1506, ->7001 (2009-2013)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
R 1106, -DT (1985-1996)
  • Use: Normal
  • Capacity 16 liter
  • Change 2400 hours/ 24 months
R 1306, -DT (1985-1996)
  • Use: Normal
  • Capacity 16 liter
  • Change 2400 hours/ 24 months
R 1506, -DT (1985-1996)
  • Use: Normal
  • Capacity 18 liter
  • Change 2400 hours/ 24 months
R 1706, -DT (1985-1990)
  • Use: Normal
  • Capacity 18 liter
  • Change 2400 hours/ 24 months
R 956, -DT (1985-1989)
  • Use: Normal
  • Capacity 16 liter
  • Change 2400 hours/ 24 months
R 1356, -DT (1982-1984)
  • Use: Normal
  • Capacity 23 liter
  • Check 10 hours
  • Change 12 months
R 1556, -DT (1982-1984)
  • Use: Normal
  • Capacity 23 liter
  • Check 10 hours
  • Change 12 months

Additional Notes

  • The Lamborghini R 1356 DT and R 1556 DT, both covering 1982-1984, carry a cooling system capacity of 23 liters, the largest figure across all listed configurations. This higher volume reflects the greater coolant demand of larger-displacement engines and more extensive cooling circuits typical of heavier agricultural machinery from that era.
  • The R 1506 DT (1985-1996) and R 1706 DT (1985-1990) share an 18-liter cooling system capacity, placing them between the 16-liter and 23-liter groups. The 18-liter figure suggests a mid-range engine displacement with a moderately sized cooling circuit relative to the other configurations listed.
  • Six configurations across the R 956, R 1106, R 1306, R 1506 (->7001), R 1506 DT, and R 1706 DT share a 16-liter or 18-liter capacity paired with a change interval of 2400 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time can mandate a coolant change even when the hour threshold has not been reached.
  • The 1982-1984 models, the R 1356 DT and R 1556 DT, specify a change interval of 12 months with no hour-based alternative. This calendar-only interval contrasts with the hour-or-calendar intervals used in later configurations and may reflect older service standards common to agricultural equipment of that period.
  • A 10-hour check interval appears in the R 1356 DT, R 1556 DT, R 1306 (->7001), and R 1506 (->7001) specifications. In service schedules for tractors and agricultural machinery, a 10-hour check typically corresponds to a daily or near-daily inspection, covering coolant level verification rather than a full fluid change.
  • The R 1106 DT and R 1306 DT (both 1985-1996) list no 10-hour check interval, unlike the ->7001 serial variants of the R 1306 and R 1506 from 2009-2013, which do include one. Both the DT variants and the ->7001 variants share the same 16-liter capacity and 2400-hour/24-month change interval, making the presence or absence of the check interval the distinguishing specification between them.
  • The ->7001 serial designation on the R 1306 and R 1506 configurations from 2009-2013 indicates a production serial number boundary, a common method in agricultural equipment documentation to differentiate specification sets within the same model line without a full model year redesignation.

Other Systems