Lamborghini Cross

Automatic transmission fluid capacity & service interval

Lamborghini Cross automatic transmission fluid capacity ranges from 35 to 52 liters. Service intervals include a check at 50 hours and a change at 1200 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Cross 100, ->ZKDT550200TL10001 (2013-2020)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 40 S (2013-2020)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 55 S (2013-2020)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 65 S (2013-2020)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 75, ->70001 (2013-2020)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 80, ->ZKDT490200TL10001 (2013-2020)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 85, ->70001 (2013-2020)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 90, ->ZKDT520200TL10001 (2013-2020)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Cross 95, ->70001 (2013-2020)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Lamborghini Cross lineup covers a wide range of models from 2013-2020, and the automatic transmission fluid specifications split into two distinct capacity groups across the range.
  • The Cross 40 S, 55 S, and 65 S share a transmission/transaxle fluid capacity of 35 liters, which reflects the smaller transmission assemblies fitted to these lower-output variants.
  • The Cross 100, 75, 80, 85, 90, and 95 all carry a significantly larger transmission/transaxle fluid capacity of 52 liters, a volume consistent with heavy-duty agricultural or industrial transaxle systems that house multiple hydraulic circuits within a single housing.
  • The 17-liter difference between the two capacity groups is substantial and indicates a fundamentally different transmission architecture rather than a minor variation in sump size.
  • Serial number cutoffs are specified for several models, including the Cross 100 (up to ZKDT550200TL10001), Cross 75 and 85 (up to serial 70001), Cross 80 (up to ZKDT490200TL10001), Cross 90 (up to ZKDT520200TL10001), and Cross 95 (up to serial 70001), meaning the listed capacities and intervals apply only to units within those production ranges.
  • All nine configurations share an identical fluid check interval of every 50 hours of operation, a short interval typical of high-load machinery where fluid condition and level can change rapidly under working stress.
  • The fluid change interval across all configurations is 1,200 hours or 24 months, whichever comes first. The dual-trigger structure means calendar time governs the change even when operational hours accumulate slowly.
  • All specifications are listed under normal use conditions, meaning the 1,200-hour and 24-month change intervals reflect standard operating environments without the shortened intervals that severe-duty classifications would impose.

Other Systems