Lamborghini Cross R

Power steering fluid capacity & service interval

Lamborghini Cross R uses power steering fluid with a capacity of 29 liters. Service intervals include a check every 50 hours and a change every 1200 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Cross 46 R (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • Cross 50 R (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • Cross 55 R (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • Cross 60 R (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Lamborghini Cross R power steering fluid is shared across a combined system that also serves the transaxle and hydraulic system, meaning the 29-liter capacity reflects the total fill for all three integrated circuits rather than a standalone power steering reservoir.
  • A 29-liter capacity is notably large by comparison to conventional automotive power steering systems, which is consistent with the demands of a hydraulic circuit that simultaneously supports transmission and implement functions in a tractor-class machine.
  • All four variants, the Cross 46 R, Cross 50 R, Cross 55 R, and Cross 60 R, share an identical 29-liter capacity for the combined transaxle, hydraulic, and power steering system, indicating a common fluid circuit architecture across the lineup starting from 2020.
  • The check interval is set at 50 hours of operation under normal use conditions, which in hour-metered equipment corresponds to relatively frequent monitoring given that 50 hours can accumulate quickly during seasonal fieldwork.
  • The fluid change interval is specified at 1200 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time governs the change even when operational hours remain low.
  • The 1200-hour change interval is applied uniformly across all four Cross R variants, reflecting no differentiation in service demands between the lower-displacement Cross 46 R and the higher-output Cross 60 R with respect to the shared hydraulic circuit.

Other Systems