Kioti/Daedong Mechron

Coolant capacity & service interval

Kioti/Daedong Mechron coolant capacity is 6,3 liters. Service intervals include checking every 10 hours and changing every 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Mechron 2200SA
  • Use: Normal
  • Capacity 6,3 liter
  • Check 10 hours
  • Change 24 months
Mechron 2200ST
  • Use: Normal
  • Capacity 6,3 liter
  • Check 10 hours
  • Change 24 months
Mechron 2200SW
  • Use: Normal
  • Capacity 6,3 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • The Kioti/Daedong Mechron 2200SA, 2200ST, and 2200SW all share an identical cooling system capacity of 6.3 liters, indicating a uniform engine cooling architecture across the three variants despite their differing configurations.
  • A 6.3-liter coolant capacity falls within the range typical of small diesel utility engines, reflecting a full system fill that includes the radiator, engine block passages, and overflow reservoir volume.
  • The coolant check interval is set at every 10 hours of operation under normal use conditions, which is a relatively short inspection cycle and reflects the importance of maintaining proper coolant level in liquid-cooled small-displacement engines.
  • The coolant change interval across all three variants is 24 months under normal use conditions, meaning the service schedule is time-based rather than hour-based for the full drain-and-refill service.
  • The alignment of check and change intervals across the 2200SA, 2200ST, and 2200SW means a single maintenance schedule applies to the cooling system regardless of which variant is in service.

Other Systems