John Deere 8000 series
Manual transmission fluid capacity & service interval
John Deere 8000 series manual transmission fluid capacity is 10 liters. Service intervals include checking at 100 hours and changing at 800 hours. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 8820 Titan II (1986-2000) |
|
Additional Notes
- The John Deere 8820 Titan II carries a manual transmission fluid capacity of 10 liters, which represents a service fill volume typical of a working transmission rather than a full overhaul quantity.
- Under normal use conditions, the 8820 Titan II manual transmission fluid change interval is set at 800 hours of operation, a figure calibrated to the demands of standard field use rather than elevated-stress applications.
- The check interval for the 8820 Titan II manual transmission fluid is 100 hours, meaning fluid level monitoring occurs at a frequency eight times greater than the full change interval across a standard service cycle.
- The 800-hour change interval on the 8820 Titan II manual transmission applies specifically to normal use conditions, meaning operations outside that classification would fall under a separate service framework not reflected in these specifications.
- A 10-liter manual transmission fluid capacity on a machine of the 8820 Titan II's class is consistent with a large-format combine drivetrain, where the transmission must manage substantial torque loads across extended harvesting seasons.