John Deere 5R(N) series

Coolant capacity & service interval

John Deere 5R(N) series coolant capacity ranges from 16 to 16,1 liters. Service intervals include checking every 10 hours and changing every 2000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5090R (2017-2022)
  • Use: Normal
  • Capacity 16,1 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5100R (2017-2022)
  • Use: Normal
  • Capacity 16,1 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5115R (2017-2022)
  • Use: Normal
  • Capacity 16,1 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5125R (2017-2022)
  • Use: Normal
  • Capacity 16,1 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5080R(N) (2008-2011)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5090R(N) (2008-2011)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5100R(N) (2008-2011)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The John Deere 5R(N) series models from 2008-2011, including the 5080R(N), 5090R(N), and 5100R(N), share a uniform cooling system capacity of 16 liters across all three variants.
  • The 2017-2022 generation models, covering the 5090R, 5100R, 5115R, and 5125R, carry a marginally higher cooling system capacity of 16.1 liters, a slight increase over the 16-liter figure of the earlier 2008-2011 generation.
  • A 16-liter or greater cooling system capacity is typical of larger agricultural tractors, reflecting the volume required to maintain thermal stability in high-load engine environments over extended operating periods.
  • All listed configurations share an identical coolant check interval of 10 hours, which corresponds to a near-daily inspection frequency under standard working conditions.
  • The change interval across all listed models is set at 2000 hours or 24 months under normal use conditions, meaning whichever threshold is reached first would govern the service event in practice.
  • The dual-criterion change interval of 2000 hours and 24 months accounts for both high-utilization machines that accumulate hours rapidly and lower-utilization machines where calendar aging of the coolant becomes the limiting factor before the hour threshold is met.
  • All specifications across the 2008-2011 and 2017-2022 model ranges are designated for normal use conditions, meaning no separate severe-duty coolant interval is listed for any of the configurations covered.

Other Systems