John Deere 2 series

Differential fluid capacity & service interval

John Deere 2 series differential fluid capacity ranges from 2,8 to 3,8 liters. Service intervals include checks at 50 and 600 hours, with a fluid change at 600 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 2026R (2018- )
  • Front
  • Use: Normal
  • Capacity 2,8 liter
  • Check 50 hours
  • Change 600 hours
  • Code: Standard MFWD
  • 2025R (2015- )
  • Front
  • Use: Normal
  • Capacity 2,8 liter
  • Check 50 hours
  • Change 600 hours
  • Code: Standard MFWD
  • 2032R (2015- )
  • Front
  • Use: Normal
  • Capacity 3,8 liter
  • Check 600 hours
  • Code: Standard MFWD

Additional Notes

  • The John Deere 2 Series front differential capacity varies by model, with the 2025R and 2026R holding 2.8 liters and the 2032R holding a larger 3.8 liters.
  • The 2025R and 2026R share identical front differential service intervals under normal use conditions, with a check interval at 50 hours and a full fluid change specified at 600 hours.
  • The 2032R front differential service schedule under normal use conditions lists only a check interval at 600 hours, without a separate fluid change interval entry.
  • The 50-hour check interval on the 2025R and 2026R front differentials represents a relatively early inspection point, which is common for confirming fluid level integrity during the initial period of regular operation.
  • The 2032R front differential capacity of 3.8 liters is approximately 35 percent greater than the 2.8-liter capacity found in the 2025R and 2026R, reflecting a physically larger differential assembly on the higher-horsepower model.
  • The 2026R shares the same 2.8-liter front differential capacity and 600-hour change interval as the 2025R, despite being introduced starting in 2018 as a distinct model within the 2 Series lineup.

Other Systems