Iseki TLE

Differential fluid capacity & service interval

Iseki TLE differential fluid capacity ranges from 5,6 to 8 liters. Service intervals consist of a 200 hour check and a 600 hour change. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • TLE3400(FH), Iseki E3CD-WTB11 (2016- )
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 200 hours
  • Change 600 hours
  • TLE4490(FS), Iseki E4CG-WB34 (2016- )
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 200 hours
  • Change 600 hours

Additional Notes

  • The Iseki TLE3400(FH) with the E3CD-WTB11 engine carries a front differential fluid capacity of 5.6 liters, which represents a service fill volume for routine maintenance rather than a full overhaul quantity.
  • The Iseki TLE4490(FS) with the E4CG-WB34 engine holds 8 liters in the front differential, a notably larger capacity that reflects the greater drivetrain scale of the FS configuration compared to the FH.
  • Both configurations share identical service interval structures under normal use conditions, with a fluid level check scheduled at 200 hours and a full fluid change at 600 hours.
  • The 200-hour check interval on both models serves as an intermediate inspection point, allowing verification of fluid level and condition well before the 600-hour change threshold is reached.
  • The 600-hour change interval applies specifically to normal use conditions on both the TLE3400(FH) and TLE4490(FS), meaning the interval is tied to standard operating environments as defined in the specifications.
  • The capacity difference between the two configurations, 5.6 liters versus 8 liters, indicates a meaningful mechanical distinction between the front differential assemblies used in each engine-model pairing, with the E4CG-WB34 unit requiring approximately 43 percent more fluid volume.

Other Systems