Iseki TE
Power steering fluid capacity & service interval
Iseki TE power steering fluid capacity ranges from 0,3 to 2 liters. Service intervals consist of checking every 100 hours and changing every 300 hours. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| TE 4320 TE, -FE (1988-1992) |
|
| TE 4370 TE, -FE (1986-1992) |
|
| TE 3210 (1984-1992) |
|
| TE 4270 (1984-1992) |
|
| TE 4270 (1984-1992) |
|
Additional Notes
- The Iseki TE 3210 carries a steering box fluid capacity of 0.3 liter, with a check interval set at every 100 hours under normal use conditions.
- The TE 4270 lists two separate steering-related entries: a power steering system and a steering box, each with a 0.3 liter capacity and a 100-hour check interval.
- The TE 4270 power steering entry adds a fluid change interval of 300 hours, a specification absent from the steering box entry for the same model.
- The TE 4320 TE and -FE variants, covering 1988-1992, carry a power steering capacity of 2 liters, which is notably larger than the 0.3 liter figure seen in the TE 3210 and TE 4270.
- The TE 4370 TE and -FE variants, covering 1986-1992, share the same 2-liter power steering capacity as the TE 4320, along with identical 100-hour check and 300-hour change intervals.
- The 2-liter capacity on the TE 4320 and TE 4370 power steering systems suggests a larger reservoir or a more extensive hydraulic circuit compared to the 0.3-liter configurations found in earlier or smaller TE models.
- Across all five entries, the 100-hour check interval is a consistent specification, applied uniformly regardless of whether the system is a steering box or a full power steering assembly.
- The 300-hour change interval appears exclusively on power steering entries, specifically the TE 4270, TE 4320, and TE 4370, while steering box entries carry no fluid change interval in the specifications.