Iseki SXG

Coolant capacity & service interval

Iseki SXG models require coolant with a capacity range of 3 to 4.1 liters. Service intervals include checking at 10 hours and changing every 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
SXG15 HE/HSE	Use: Normal Capacity 3 liter Check 10 hours Change 12 months
SXG19 UE/UGE	Use: Normal Capacity 3,5-4,1 liter Check 10 hours Change 12 months
SXG216 HE42/HSE42	Use: Normal Capacity 3 liter Check 10 hours Change 12 months
SXG22 UE/UGE	Use: Normal Capacity 3,5-4,1 liter Check 10 hours Change 12 months
SXG323 HE42/HGE42	Use: Normal Capacity 3,5-4,1 liter Check 10 hours Change 12 months
SXG326 HE42/HGE42	Use: Normal Capacity 3,5-4,1 liter Check 10 hours Change 12 months

Additional Notes

For Iseki SXG15 HE/HSE, coolant capacity is listed as 3 liter for the cooling system under normal use. A single capacity value in a cooling-system entry indicates the stated fill amount for routine service of the system.
For SXG19 UE/UGE, coolant capacity is stated as 3,5-4,1 liter under normal use. A range indicates variation within the listed configuration group rather than one fixed amount for every unit in the group.
SXG216 HE42/HSE42 carries the same cooling-system capacity as SXG15 HE/HSE at 3 liter, with a check interval of 10 hours and a change interval of 12 months under normal use.
The Iseki SXG22 UE/UGE cooling system is specified at 3,5-4,1 liter in normal use, matching the interval pattern of checking every 10 hours and changing every 12 months.
SXG323 HE42/HGE42 uses a 3,5-4,1 liter coolant capacity for the cooling system. In the same row, the service schedule remains tied to normal use with inspection at 10-hour intervals and coolant replacement at 12 months.
SXG326 HE42/HGE42 also lists 3,5-4,1 liter for cooling-system capacity under normal use. Within the specification line, "Check 10 hours" refers to the recurring inspection interval, while "Change 12 months" refers to the replacement interval.
Across the listed SXG cooling-system entries, interval wording stays the same where normal use applies: coolant level or condition check at 10 hours and coolant change at 12 months.
Capacity values vary by type between a fixed 3 liter fill and a ranged 3,5-4,1 liter fill. In coolant specifications, such values refer to system volume associated with the cooling system entry rather than a viscosity or grade measurement.