Hürlimann XS

Power steering fluid capacity & service interval

Hürlimann XS uses power steering fluid with a capacity of 41 liters. Service intervals include checking every 10 hours and changing every 1200 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • XS100 (2005-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • XS70 (2005-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • XS75 (2005-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • XS90 (2005-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Hürlimann XS power steering fluid system is shared with the transaxle and hydraulic system, meaning the 41-liter capacity figure reflects a combined reservoir rather than a dedicated power steering circuit alone.
  • A 41-liter capacity is notably large relative to passenger vehicle power steering systems, which is consistent with agricultural tractor hydraulic circuits that integrate steering, implement control, and transmission functions into a single fluid volume.
  • All four variants covered — the XS70, XS75, XS90, and XS100 — carry an identical 41-liter capacity across the 2005-2009 model years, indicating a shared hydraulic platform regardless of engine output differences between trims.
  • The check interval is set at every 10 operating hours under normal use conditions, which reflects the high-demand nature of tractor hydraulic systems where fluid level and condition can change more rapidly than in on-road vehicles.
  • The change interval is specified at 1200 hours or 12 months, whichever comes first under normal use conditions, pairing an engine-hour threshold with a calendar limit to account for both high-use and low-use seasonal operation patterns.
  • The calendar-based 12-month change interval alongside the 1200-hour threshold means that a tractor used infrequently would still require a fluid change annually, as time-related fluid degradation applies independently of accumulated operating hours.

Other Systems