Hürlimann XL

Differential fluid capacity & service interval

Hürlimann XL differential fluid capacity ranges from 5,8 to 8,5 liters. Service intervals include checking at 250 hours and changing at 1000 hours or 12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • XL 130 (2006-2009)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • XL 150 (2006-2009)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • XL 150.7 (2006-2009)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • XL 165.7 (2006-2009)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • XL 180.7 (2006-2009)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • The Hürlimann XL 130, XL 150, XL 150.7, and XL 165.7 all share a front differential fluid capacity of 5.8 liters across the 2006-2009 model years.
  • The XL 180.7 carries a front differential fluid capacity of 8.5 liters, which is notably higher than the 5.8-liter figure shared by the four lower-output variants in the same lineup.
  • A fill capacity of 8.5 liters in the XL 180.7 front differential suggests a larger housing assembly, consistent with the greater torque demands placed on front axle components in higher-output tractor configurations.
  • Across all five XL variants from 2006-2009, the front differential fluid check interval is set at 250 hours under normal use conditions.
  • The fluid change interval for the front differential is specified at 1000 hours or 12 months, whichever comes first, and applies uniformly across all five XL variants listed for 2006-2009.
  • The 1000-hour change interval reflects a time-in-operation measurement common in agricultural equipment, where engine hours rather than distance traveled serve as the primary service metric.
  • The 12-month calendar limit on the fluid change interval means a machine with low annual operating hours would still require a fluid change within a year, regardless of accumulated hours.

Other Systems