Hürlimann SX

Power steering fluid capacity & service interval

Hürlimann SX uses power steering fluid with a capacity of 113 liters. Service intervals include checks every 300 hours and changes every 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • SX 1600 (2000-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 113 liter
  • Check 300 hours
  • Change 12 months
  • Code: 60/60
  • SX 1800 (2000-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 113 liter
  • Check 300 hours
  • Change 12 months
  • Code: 60/60
  • SX 2000 (2000-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 113 liter
  • Check 300 hours
  • Change 12 months
  • Code: 60/60
  • SX 1200 (1999-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 113 liter
  • Check 300 hours
  • Change 12 months
  • Code: 60/60
  • SX 1350 (1999-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 113 liter
  • Check 300 hours
  • Change 12 months
  • Code: 60/60
  • SX 1500 (1999-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 113 liter
  • Check 300 hours
  • Change 12 months
  • Code: 60/60

Additional Notes

  • Across all six Hürlimann SX variants covered, the power steering fluid capacity is listed as 113 liters. A figure of this magnitude reflects a shared reservoir serving the transaxle, hydraulic system, and power steering simultaneously, rather than a dedicated power steering circuit alone.
  • The 113-liter capacity is consistent across the SX 1200, SX 1350, SX 1500, SX 1600, SX 1800, and SX 2000, indicating that the integrated fluid system architecture does not vary between these models despite differences in engine output ratings.
  • The check interval is set at 300 operating hours across all listed variants. In agricultural machinery, hour-based intervals are standard because engine load and usage patterns vary far more than calendar time would reflect.
  • The fluid change interval is specified as 12 months for all six variants under normal use conditions. A calendar-based change interval running alongside the hour-based check interval means whichever threshold is reached first would typically govern service timing in practice.
  • The SX 1200, SX 1350, and SX 1500 share a production window of 1999-2010, while the SX 1600, SX 1800, and SX 2000 carry a start year of 2000. All six models share identical fluid capacity and service interval specifications despite the one-year difference in introduction dates.
  • The note field for every row identifies the fluid as serving the transaxle, hydraulic system, and power steering together. In large agricultural tractors, combining these functions into a single shared sump is a common design approach that reduces the number of separate fluid maintenance points.

Other Systems