Hürlimann H-4000
Coolant capacity & service interval
Hürlimann H-4000 uses coolant with a capacity of 13 liters. Service intervals include checks every 10 hours and changes every 2400 hours or 24 months. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| H-4105 Elite (1989-1995) |
|
Additional Notes
- The Hürlimann H-4000 H-4105 Elite carries a coolant system capacity of 13 liters, which represents a full cooling system fill rather than a partial top-up volume.
- A check interval of every 10 hours places coolant level inspection among the most frequent routine tasks on the H-4105 Elite, reflecting the importance of maintaining proper thermal regulation in agricultural equipment operating under sustained load.
- The change interval for the H-4105 Elite cooling system is set at 2400 hours or 24 months, whichever comes first, meaning both an operational threshold and a calendar limit govern when a full coolant replacement is due.
- The 24-month calendar limit on coolant changes applies regardless of how many hours the machine has accumulated, so low-utilization units reaching two years of service still fall within the change requirement under normal use conditions.
- The 2400-hour drain interval, combined with the 10-hour check frequency, reflects a maintenance structure where fluid condition is monitored very regularly over a long service life before a full system change is warranted.