Ford FW

Brake fluid capacity & service interval

Ford FW uses brake fluid with a capacity of 0,5 liter. Service intervals occur every 100 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
FW-20 (1979- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
FW-30 (1979- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
FW-40 (1979- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
FW-60 (1979- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours

Additional Notes

  • The Ford FW-20, FW-30, FW-40, and FW-60 each carry a hydraulic brake system capacity of 0.5 liter, a figure consistent with a service fill level rather than a full overhaul volume.
  • A 0.5 liter capacity in a hydraulic brake system typically reflects the reservoir volume, which is the quantity of fluid maintained under normal operating conditions rather than a complete system flush volume.
  • The check interval for the hydraulic brake system across all four FW variants is set at 100 hours, a time-based measurement common in agricultural and industrial equipment where engine hours serve as the primary service metric rather than distance traveled.
  • All four configurations share identical brake fluid specifications, with no variation in either capacity or check interval across the FW-20, FW-30, FW-40, and FW-60 model designations starting from 1979.
  • The 100-hour check interval applies under normal use conditions, meaning the specification is tied to standard operating circumstances rather than a severe or heavy-duty duty cycle.

Other Systems