Fiat-Trattori Winner
Coolant capacity & service interval
Fiat-Trattori Winner uses coolant with a capacity of 23,5 liters. Service intervals occur every 1600 hours or 24 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Winner F100 DT (1993-1996) |
|
| Winner F115 DT (1993-1996) |
|
| Winner F130 DT (1993-1996) |
|
| Winner F140 DT (1993-1996) |
|
| Winner F100 (1990-1993) |
|
| Winner F110 (1990-1993) |
|
| Winner F120 (1990-1993) |
|
| Winner F130 Turbo (1990-1993) |
|
Additional Notes
- The Fiat-Trattori Winner series cooling system capacity is 23.5 liters across all listed configurations, spanning both the F100 and F140 DT variants. In agricultural machinery, a cooling system capacity of this size reflects the demands of high-displacement diesel engines operating under sustained load conditions typical of field work.
- The 23.5-liter figure represents the total cooling system fill volume, which in tractors of this class includes the radiator, engine block passages, cylinder head galleries, and associated hoses and reservoir. A service fill of this magnitude is consistent with large-frame tractors rather than compact utility models.
- The coolant change interval across all Winner configurations is specified at 1,600 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format, combining an engine-hours threshold with a calendar limit, accounts for machines that accumulate hours slowly and would otherwise retain aging coolant beyond its effective service life.
- The 1,600-hour interval is notably longer than the 500-1,000 hour intervals common on lighter agricultural equipment, reflecting either the use of extended-life coolant formulations or the thermal stability requirements of the Winner series engine designs.
- The Winner lineup is divided into two distinct production periods within the 1990-1996 span. Models designated F100, F110, F120, and F130 Turbo carry 1990-1993 production years, while the DT variants, including the F100 DT, F115 DT, F130 DT, and F140 DT, are associated with 1993-1996. The DT designation in Fiat-Trattori nomenclature conventionally denotes four-wheel drive (dual traction) configurations.
- Despite the mechanical differences implied by the DT and Turbo designations, the cooling system capacity and change interval remain identical at 23.5 liters and 1,600 hours/24 months across all variants. The turbocharged F130 Turbo, for instance, shares the same cooling specifications as the naturally aspirated F100, suggesting a common cooling system architecture across the Winner range.
- The F115 DT and F130 DT appear only in the 1993-1996 period, with no corresponding non-DT equivalents in the earlier 1990-1993 group at those power ratings. The F130 Turbo, conversely, appears only in the 1990-1993 period without a direct DT counterpart in the later group, indicating a shift in model lineup composition between the two production phases.