Fiat-Trattori 86

Coolant capacity & service interval

Fiat-Trattori 86 uses coolant with a capacity range of 10,5 to 13,5 liters. Service intervals require changes every 1600 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
50-86V, 50-86VDT (1994-1996)
  • Use: Normal
  • Capacity 12 liter
  • Change 1600 hours/ 24 months
55-86V/F, 55-86VDT/FDT (1994-1996)
  • Use: Normal
  • Capacity 12 liter
  • Change 1600 hours/ 24 months
60-86V/F, 60-86VDT/FDT (1994-1996)
  • Use: Normal
  • Capacity 12 liter
  • Change 1600 hours/ 24 months
62-86F, 62-86FDT (1994-1996)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 1600 hours/ 24 months
70-86V, 70-86VDT (1994-1996)
  • Use: Normal
  • Capacity 13,5 liter
  • Change 1600 hours/ 24 months
72-86F, 72-86FDT (1994-1996)
  • Use: Normal
  • Capacity 13,5 liter
  • Change 1600 hours/ 24 months
72-86LP, 72-86LPDT (1994-1996)
  • Use: Normal
  • Capacity 13,5 liter
  • Change 1600 hours/ 24 months
82-86F, 82-86FDT (1994-1996)
  • Use: Normal
  • Capacity 13,5 liter
  • Change 1600 hours/ 24 months
82-86LP, 82-86LPDT (1994-1996)
  • Use: Normal
  • Capacity 13,5 liter
  • Change 1600 hours/ 24 months

Additional Notes

  • Across the Fiat-Trattori 86 series (1994-1996), cooling system change intervals are uniform at 1,600 operating hours or 24 months under normal use conditions, whichever comes first. The dual-trigger structure means time elapsed can prompt a change even when hour accumulation is low.
  • The 62-86F and 62-86FDT carry a cooling system capacity of 10.5 liters, the smallest figure among all listed 86 series configurations. A lower capacity relative to other variants in the same range typically reflects a smaller engine displacement or a more compact cooling circuit design.
  • The 50-86V, 50-86VDT, 55-86V/F, 55-86VDT/FDT, 60-86V/F, and 60-86VDT/FDT all share a 12-liter cooling system capacity, placing them in a mid-range group within the 86 series lineup for 1994-1996.
  • The 70-86V, 70-86VDT, 72-86F, 72-86FDT, 72-86LP, 72-86LPDT, 82-86F, 82-86FDT, 82-86LP, and 82-86LPDT all carry a 13.5-liter cooling system capacity, the largest value listed across the 86 series for 1994-1996. Larger cooling system volumes generally correspond to higher-displacement engines requiring greater heat dissipation.
  • The LP designation, present on the 72-86LP, 72-86LPDT, 82-86LP, and 82-86LPDT, denotes a low-profile or orchard/vineyard configuration. Despite the structural differences such variants typically involve, the cooling system capacity of 13.5 liters remains identical to the standard F-suffix variants at the same power rating.
  • The DT suffix across multiple configurations indicates a turbocharged engine variant. Turbocharged and naturally aspirated versions within the same model designation share identical cooling system capacities and change intervals in all listed rows.

Other Systems