Fendt 800 Vario COM3b
Brake fluid capacity & service interval
The Fendt 800 Vario COM3b uses brake fluid with a capacity of 0.5 liter. The data covers 5 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across all five variants of the Fendt 800 Vario COM3b covered by the specifications — the 819, 822, 824, 826, and 828 Vario — the brake fluid capacity is uniformly listed at 0.5 liter under normal use conditions.
- The 0.5 liter figure represents a relatively modest reservoir volume, consistent with the brake fluid holding capacity of a hydraulic actuating circuit rather than a large-volume hydraulic system.
- Each variant in the specifications carries a note indicating a pneumatic brake system, which means the primary braking force is delivered by compressed air, with the hydraulic brake fluid circuit serving a supplementary or actuating role rather than being the sole braking medium.
- The specifications apply to serial numbers beginning at 0101 for each respective variant, indicating the capacity and system note are tied to a defined production start point within the 2011-2016 model range.
- The Stage IIIb / EPA 4i emissions classification shared across all five variants places them within a specific regulatory tier for off-road diesel engines, and the brake fluid capacity of 0.5 liter is consistent across all engine outputs represented in that emissions class within the 800 Vario COM3b lineup.