Fendt 700 Vario COM3b

Brake fluid capacity & service interval

Fendt 700 Vario COM3b requires brake fluid with a capacity of 0,5 liter. Service intervals include a check every 50 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 714 Vario, 732/../0101 -> (2011-2015)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • 716 Vario, 733/../0101 -> (2011-2015)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • 718 Vario, 734/../0101 -> (2011-2015)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • 720 Vario, 735/../0101 -> (2011-2015)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • 722 Vario, 736/../0101 -> (2011-2015)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • 724 Vario, 737/../0101 -> (2011-2015)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours

Additional Notes

  • All six variants of the Fendt 700 Vario COM3b covered in these specifications — the 714, 716, 718, 720, 722, and 724 Vario — share an identical brake fluid capacity of 0.5 liter. In the context of agricultural machinery, a small reservoir volume like this is consistent with a supplementary or pilot hydraulic circuit rather than a primary braking medium.
  • Each variant listed carries a note identifying a pneumatic brake system. In pneumatic braking, compressed air does the primary work of actuating the brakes, and brake fluid is typically confined to a smaller hydraulic assist or modulator circuit, which aligns with the modest 0.5-liter capacity figure across all rows.
  • The check interval for brake fluid is set at 50 hours under normal use conditions across all six variants. In agricultural equipment, operating hours rather than calendar time are the standard measure of service intervals, since field machines can accumulate hours rapidly during seasonal work.
  • The 50-hour check interval is notably short relative to many other fluid service intervals on tractors of this class. A frequent check interval on a pneumatic brake system's fluid circuit reflects the importance of maintaining correct fluid level and condition in the hydraulic portion of a hybrid pneumatic-hydraulic braking arrangement.
  • The specifications apply uniformly across the 714 through 724 Vario model range for the 2011-2015 period, with no variation in capacity or interval between the lower- and higher-numbered variants. The model numbers in this series generally correspond to different power outputs, yet the brake fluid system specifications remain consistent across all of them.

Other Systems