Fendt 200 Vario V/F/P
Differential fluid capacity & service interval
Fendt 200 Vario V/F/P uses differential fluid with a capacity range of 2,5 to 3,9 liters. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across the Fendt 200 Vario V/F/P range introduced in 2021, front differential fluid capacity splits into two distinct values depending on the variant designation: 2.5 liters for V/F models and 3.9 liters for P models.
- The 207 V/F, 208 V/F, 209 V/F, 210 V/F, and 211 V/F Vario all share an identical front differential capacity of 2.5 liters, indicating a common front axle differential housing across the V and F variant lineup.
- The Fendt 209 P, 210 P, and 211 P Vario each carry a front differential capacity of 3.9 liters, which is 1.4 liters greater than the corresponding V/F variants at the same power rating. A larger fluid volume in a differential housing generally reflects a physically larger or more heavily loaded axle assembly.
- The P designation in the 200 Vario series is associated with the higher 3.9-liter front differential capacity across all three P-variant models listed, while the V/F designation consistently corresponds to the 2.5-liter figure regardless of the specific model number within the range.
- All eight configurations carry a normal use condition for the front differential service interval, meaning the listed capacities apply under standard operating conditions rather than severe-duty cycles.
- The capacity difference between P and V/F variants is proportionally significant, with the P-variant differential holding 56 percent more fluid than the V/F equivalent. In differential service, fill volume directly determines the lubrication reserve available to gears and bearings under load.