Fendt 200 Vario COM3
Brake fluid capacity & service interval
The Fendt 200 Vario COM3 uses brake fluid with a capacity of 0.5 liter. The data covers 5 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Fendt 200 Vario COM3 brake fluid capacity is listed at 0.5 liter across all five variants covered in the 2009-2017 model range, specifically the 207 S through 211 S Vario configurations. A 0.5 liter figure is characteristic of a service fill volume, representing the fluid held within the hydraulic brake circuit rather than a full system overhaul quantity.
- Each of the five variants — 207 S, 208 S, 209 S, 210 S, and 211 S Vario — carries an identical 0.5 liter brake fluid capacity, indicating no variation in reservoir or circuit sizing across the model steps within the COM3 generation for this system.
- All five configurations are noted as having a pneumatic brake system. In agricultural machinery, a pneumatic brake system uses compressed air as the primary braking medium, with brake fluid typically serving a secondary or auxiliary hydraulic function, which is consistent with the relatively small 0.5 liter capacity specified here.
- The use condition recorded for all five variants is normal, meaning the 0.5 liter capacity figure applies under standard operating conditions rather than a severe-use or first-change scenario.
- The model year span of 2009-2017 applies uniformly to all five variants listed, and the 0.5 liter brake fluid capacity remains constant throughout that entire period without any year-specific deviation recorded in the specifications.