Deutz-Fahr Series 6 C RVSHIFT

Coolant capacity & service interval

Deutz-Fahr Series 6 C RVSHIFT coolant capacity is 15,5 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
6115C RVSHIFT, Stage 5->ZKDGX50200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6115C RVSHIFT, Stage 5->ZKDLS40200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6115C RVSHIFT, Stage 5->ZKDLW60200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6125C RVSHIFT, Stage 5->ZKDGX60200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6125C RVSHIFT, Stage 5->ZKDLS50200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6125C RVSHIFT, Stage 5->ZKDLW70200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6135C RVSHIFT, Stage 5->ZKDGX70200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6135C RVSHIFT, Stage 5->ZKDLS60200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6135C RVSHIFT, Stage 5->ZKDLW80200TD50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Series 6 C RVSHIFT cooling system capacity is 15.5 liters across all three model variants — the 6115C, 6125C, and 6135C — regardless of serial number prefix. A uniform capacity across power variants of the same platform is common when the engine block and cooling jacket share the same physical architecture.
  • Each configuration carries a coolant check interval of 10 hours. In agricultural machinery, a 10-hour check interval aligns with daily or near-daily inspection routines during active field seasons, allowing early detection of leaks or concentration drift before significant engine stress occurs.
  • The coolant change interval is specified at 2000 hours or 24 months, whichever comes first. The dual-trigger format — combining an operational hour threshold with a calendar limit — accounts for machines that accumulate hours slowly, where coolant degradation proceeds through chemical aging rather than thermal cycling alone.
  • All nine configurations listed are Stage 5 emissions-compliant units, with serial numbers beginning from 2022. Stage 5 refers to the EU's most stringent non-road mobile machinery emissions standard, which imposes particulate number limits in addition to mass-based pollutant thresholds, often requiring more sophisticated cooling management to support aftertreatment systems.
  • The three serial number prefixes — ZKDGX, ZKDLS, and ZKDLW — appear across all three power variants (6115C, 6125C, 6135C) with sequential numeric increments in the prefix. This pattern suggests the prefixes correspond to different regional markets or homologation territories rather than mechanical differences, since the cooling specifications remain identical across all nine rows.

Other Systems