Deutz-Fahr Series 5 DV TTV

Coolant capacity & service interval

Deutz-Fahr Series 5 DV TTV uses coolant with a capacity of 12 liters. Service intervals include checks every 10 hours and changes every 2400 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5090 DV TTV, Stage 5->ZKDHK50200TD50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5095 DV TTV, Stage 5->ZKDHK70200TD50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5100 DV TTV, Stage 5->ZKDHK60200TD50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5105 DV TTV, Stage 5->ZKDHK80200TD50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5115 DV TTV, Stage 5->ZKDKK10200TD50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5090 DV, ->ZKDEM80200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5090.4 DV, ->ZKDEN60200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5100 DV, ->ZKDEN20200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5105 DV, ->ZKDEP00200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5115 DV, ->ZKDEP40200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Series 5 DV TTV cooling system holds 12 liters across all ten configurations listed, spanning both the pre-Stage 5 TTV variants introduced from 2020 and the Stage 5 variants introduced from 2021. A 12-liter capacity is typical for a mid-range agricultural tractor engine cooling circuit, accounting for the engine block, cylinder head passages, radiator, and associated hoses.
  • Coolant level checks are specified at every 10 hours of operation under normal use conditions. A 10-hour check interval is notably short and reflects the critical role coolant plays in protecting engine components during heavy field work, where heat loads can fluctuate significantly.
  • The coolant change interval is set at 2400 hours or 24 months, whichever comes first, under normal use conditions. The dual threshold means calendar time governs the change even when annual machine hours are low, since coolant additives degrade over time regardless of operational hours.
  • All five Stage 5 models — the 5090, 5095, 5100, 5105, and 5115 DV TTV — share an identical 12-liter capacity and the same check and change intervals. Stage 5 refers to the EU Stage V emissions standard, which requires more advanced exhaust aftertreatment, yet the cooling system specifications remain uniform across the power range within that group.
  • The five earlier TTV DV configurations — the TTV 5090, TTV 5090.4, TTV 5100, TTV 5105, and TTV 5115 — carry the same 12-liter capacity and identical service intervals as the Stage 5 group. The TTV 5090.4 DV is distinguished by a separate serial number prefix (ZKDEN6) from the standard TTV 5090 DV (ZKDEM8), indicating a distinct production variant, yet the cooling system specifications are unchanged.
  • Each configuration is identified by a unique serial number starting point, such as ZKDHK50200TD50001 for the Stage 5 5090 DV TTV and ZKDEM80200TD50001 for the TTV 5090 DV. These serial number thresholds define the exact production point from which the listed specifications apply, making serial number verification relevant when applying service data.

Other Systems