Deutz-Fahr Series 5 DK

Brake fluid capacity & service interval

Deutz-Fahr Series 5 DK uses brake fluid with a capacity of 1 liter. Service intervals require a check every 50 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5065 DK, Stage 3B->NNZJY80200BD50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5075 DK, Stage 3B->NNZJY90200BD50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • The Deutz-Fahr Series 5 DK brake fluid specifications cover the 5065 DK and 5075 DK, both identified by Stage 3B serial number thresholds starting from 2022.
  • Both the 5065 DK and 5075 DK share an identical hydraulic brake system capacity of 1 liter, which is a relatively modest volume consistent with a dedicated brake fluid reservoir rather than a combined hydraulic circuit fill.
  • The 50-hour check interval applies to normal use conditions across both configurations, meaning the hydraulic brake system is subject to fairly frequent inspection relative to many other tractor service points.
  • The serial number breakpoints, NNZJY80200BD50001 for the 5065 DK and NNZJY90200BD50001 for the 5075 DK, define the exact production boundary from which the 2022 specifications apply.
  • The capacity figure of 1 liter is consistent across both engine output variants, indicating no difference in brake system reservoir sizing between the 5065 DK and 5075 DK despite their differing power ratings.

Other Systems