Claas Lexion 5000
Differential fluid capacity & service interval
Claas Lexion 5000 differential fluid capacity ranges from 9,6 to 11,4 liters. Service intervals occur every 500 hours or 12 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
Additional Notes
- Across the Lexion 5300, 5400, and 5500 / TerraTrac variants with the CS83 header, two distinct rear differential fluid capacities are listed: 11.4 liters and 9.6 liters, each tied to specific part number combinations rather than to separate model variants.
- The 11.4-liter capacity applies to part numbers 1499/303 and 1499/302, while the 9.6-liter capacity applies to part numbers 1499/311 and 1499/310, indicating that the physical differential unit installed determines the correct fill volume.
- A service fill of 11.4 liters represents a notably larger sump than the 9.6-liter alternative, a difference of 1.8 liters that would be consequential if the wrong target volume were used during a fluid change.
- The Claas Lexion 5000 series rear differential fluid change interval under normal use conditions is 500 operating hours or 12 months, whichever comes first, combining a time-based and hour-based threshold in a single service requirement.
- All three model designations covered in the specifications share identical capacity values and identical change intervals, meaning the CS83 header configuration is the governing factor for differential service specs across the 5300, 5400, and 5500 / TerraTrac in the 2021 starting year.