Claas Jaguar, 500
Transfer case fluid capacity & service interval
Claas Jaguar 500 transfer case fluid capacity ranges from 0,4 to 9 liters. Service intervals consist of 500 hours or 12 months, and 1000 hours. The data covers 33 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across all Claas Jaguar 500 series configurations from 2020, each machine contains three distinct transfer case assemblies: the feeder drive, the feeder unit, and the main drive. Each carries a separate fluid capacity and a separate service interval, making them independent service points rather than a single shared system.
- The feeder drive transferbox holds 0.4 liter across every listed configuration, from the Jaguar 830 through the Jaguar 880. A capacity this small reflects a compact gear assembly with minimal fluid volume requirements, where precise fill level is critical to avoid both starvation and overfill.
- The feeder unit transferbox carries a standard capacity of 1.9 liter, but when equipped with the variable speed option, the capacity rises to 9 liter. The variable speed variant's substantially larger volume reflects the additional hydraulic or mechanical components integrated into that assembly.
- The main drive transferbox holds 2.7 liter across all listed Jaguar 500 series configurations and engine pairings from 2020. As the primary power distribution point, a capacity in this range is consistent with a heavy-duty agricultural transfer case designed for sustained high-load operation.
- The feeder drive and feeder unit transferboxes share a change interval of 500 hours or 12 months, whichever comes first. The dual-trigger format means calendar time alone can mandate a fluid change even when operating hours remain below the threshold, which is relevant for machines used seasonally.
- The main drive transferbox carries a change interval of 1000 hours, double the interval applied to the feeder drive and feeder unit. The extended interval reflects the different operating conditions and fluid volume of the main drive assembly relative to the smaller feeder-side units.
- The Jaguar 860 Tier3 is the only model in the listed specifications to appear with two different engine options: the Mercedes-Benz OM460LA and the Mercedes-Benz OM502LA. Despite the different engines, the transfer case fluid capacities and change intervals are identical across both engine variants for all three transferbox locations.
- Tier 3 configurations across the Jaguar 830, 840, 850, 860, and 870 all use either the Mercedes-Benz OM460LA or OM502LA engine. Tier 4/Stage V configurations across the Jaguar 840, 850, 860, 870, and 880 use the OM470LA, OM471LA, or OM473LA. In all cases, the transfer case fluid capacities and intervals remain uniform regardless of which emissions tier or engine variant is fitted.