Case - IH Puma CVT

Differential fluid capacity & service interval

Case - IH Puma CVT differential fluid capacity ranges from 9 to 11 liters. Service intervals include checks at 300 hours and changes at 1200 hours or 12 months. The data covers 12 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Puma 150 CVT (2016- )
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 165 CVT (2016- )
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 185 CVT (2016- )
  • Front
  • Use: Normal
  • Capacity 11 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 200 CVT (2016- )
  • Front
  • Use: Normal
  • Capacity 11 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 220 CVT (2016- )
  • Front
  • Use: Normal
  • Capacity 11 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 240 CVT (2016- )
  • Front
  • Use: Normal
  • Capacity 11 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 130 CVT (2015- )
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 145 CVT (2015- )
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 160 CVT (2015- )
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 130 CVT (2011-2014)
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 145 CVT (2011-2014)
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Puma 160 CVT (2011-2014)
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The front differential fluid capacity across Case-IH Puma CVT models falls into two distinct values: 9 liters for the 130, 145, 150, 160, and 165 CVT variants, and 11 liters for the higher-output 185, 200, 220, and 240 CVT variants introduced from 2016 onward.
  • The 11-liter front differential capacity on the Puma 185, 200, 220, and 240 CVT models represents a larger fluid volume than the 9-liter figure seen on lower-output variants, consistent with the greater mechanical demands placed on front axle components in higher-horsepower agricultural tractors.
  • All listed Puma CVT configurations share a uniform check interval of 300 hours for the front differential fluid, regardless of model year or power rating.
  • The fluid change interval is specified at 1200 hours or 12 months across all listed configurations, whichever comes first. The dual-trigger format means calendar time can mandate a change even when the hour threshold has not been reached, which is relevant for tractors operating at lower annual utilization.
  • The 300-hour check interval represents roughly one-quarter of the 1200-hour change interval, meaning a typical service cycle would include approximately three fluid level or condition checks before a full drain-and-fill is due.
  • The Puma 130 CVT and Puma 145 CVT each appear in two distinct specification entries: one covering 2011-2014 and another starting from 2015. Both entries carry identical front differential fluid specifications, indicating no change in capacity or service intervals between those production periods for those models.
  • The Puma 160 CVT similarly spans two specification entries across 2011-2014 and from 2015 onward, with the 9-liter capacity and 1200-hour or 12-month change interval remaining unchanged across both periods.
  • The Puma 150 CVT, 165 CVT, 185 CVT, 200 CVT, 220 CVT, and 240 CVT all carry a starting year of 2016, placing the introduction of the full upper-range lineup within that model year.

Other Systems