Case - IH Magnum

Transfer case fluid capacity & service interval

Case - IH Magnum transfer case fluid capacity is 0,27 liters. Service intervals include normal use. The data covers 11 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Magnum 190 (2016- )
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 210 (2016- )
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 225 (2016- )
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 180 (2014-2019)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 200 (2014-2019)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 220 (2014-2019)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 240 (2014-2019)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 180 Tier 3 (2008-2011)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 190 Tier 3 (2008-2011)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 210 Tier 3 (2008-2011)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD
Magnum 225 Tier 3 (2008-2011)
  • Use: Normal
  • Capacity 0,27 liter
  • Code: MFWD

Additional Notes

  • Across all listed Case IH Magnum configurations spanning 2008-2019, the transfer case (transferbox) fluid capacity is uniformly specified at 0.27 liter. A capacity this small is consistent with a sealed or semi-sealed transfer box unit rather than a large shared reservoir, reflecting the compact nature of front axle engagement mechanisms common in high-horsepower agricultural tractors.
  • The 0.27 liter figure represents a service fill capacity, meaning the volume of fluid required during a routine drain-and-refill service. Compact transfer box assemblies of this type typically hold only enough fluid to lubricate internal gears and bearings rather than to serve a hydraulic actuation function.
  • The Tier 3 variants, covering the Magnum 180, 190, 210, 225, and 225 across model years 2008-2011, share the identical 0.27 liter transfer case capacity as the later non-Tier 3 counterparts. The emissions tier classification, which relates to engine exhaust standards, has no bearing on the transfer case fluid volume in these specifications.
  • The Magnum 180, 200, 220, and 240 are each listed for the 2014-2019 model year range, and all carry the same 0.27 liter transfer case capacity. No variation in fluid volume exists across these four power ratings within that generation.
  • The Magnum 190, 210, and 225 configurations introduced from 2016 onward also retain the 0.27 liter transfer case specification, consistent with the earlier 2014-2019 and 2008-2011 Tier 3 entries. The transfer box design and fluid requirement remained unchanged across these generational introductions.
  • All specifications listed apply to normal use conditions. In agricultural equipment contexts, normal use typically refers to standard field and road operation as opposed to severe duty cycles involving extreme loads, temperatures, or continuous high-stress operation.

Other Systems