Amazone Pantera

Coolant capacity & service interval

Amazone Pantera coolant capacity is 38 liters. Service intervals include checking at 100 hours and changing at 2000 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Pantera 4504 CP1, Euro 3A/5 (2022- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4504 CP2, Euro 3A/5 (2022- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4503 CP1, Euro 3A/5 (2020- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4503 CP2, Euro 3A/5 (2020- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4001 (2013- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4502 CP1, Euro 3A/3B (2013- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4502 CP1, Euro 3A/4 (2013- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4502 CP2, Euro 3A/3B (2013- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Pantera 4502 CP2, Euro 3A/4 (2013- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Amazone Pantera cooling system capacity is 38 liters across all listed configurations, from the 4001 through to the 4504 variants. A 38-liter figure is consistent with large agricultural self-propelled sprayer platforms, where extended engine cooling demands and high-capacity powertrains require substantially more coolant volume than typical road vehicles.
  • All configurations share an identical check interval of every 100 hours under normal use conditions. In hour-based service schedules common to agricultural machinery, 100-hour checks are a standard short-cycle inspection point designed to catch coolant level loss or contamination before a full drain-and-fill interval is reached.
  • The coolant change interval is specified as 2000 hours or 24 months, whichever comes first, across every listed Pantera variant. The dual-trigger format means a machine with low annual hours would still require a coolant change at the 24-month mark, while a heavily used machine would reach the 2000-hour threshold before the calendar limit.
  • The CP1 and CP2 designations appear across the 4502, 4503, and 4504 model lines, representing different chassis or pump configurations within each series. Despite these mechanical differences, the cooling system capacity and service intervals remain uniform at 38 liters, 100-hour checks, and 2000-hour/24-month changes.
  • The Pantera 4502 is listed with two distinct emissions standard pairings: Euro 3A/3B and Euro 3A/4. Both CP1 and CP2 variants carry the same split, yet the cooling system specifications are identical across all four 4502 rows, indicating the emissions tier differences do not affect coolant capacity or service scheduling.
  • The Pantera 4503 series, introduced from 2020, carries a Euro 3A/5 emissions classification for both CP1 and CP2 variants. The step from Euro 3A/4 to Euro 3A/5 in the 4502-to-4503 transition represents a tighter emissions standard, yet the cooling system specifications remain unchanged at 38 liters and the same service intervals.
  • The Pantera 4504, introduced from 2022 in both CP1 and CP2 forms, retains the Euro 3A/5 classification seen in the 4503 series. The cooling system capacity and service intervals are consistent with all earlier Pantera variants, placing the 4504 within the same maintenance framework as the broader Pantera range.